TOUCH SCREEN BASED WHEEL CHAIR IMPLEMENTATION

0
83

AIM:

The main aim of this project is to design a remote vehicle system which is operated through touch screen.

PURPOSE:

The purpose of the project is to implement a remote vehicle system i.e., directions of the vehicle are controlled through the touch screen which is connected the controller.

BLOCK DIAGRAM:

51 PROJDESCRIPTION:

In this project, there are two sections (transmitter & receiver) as shown in the block diagrams. The instructions such as Left, Right etc are processed and are given by the person by operating touch screen. So based upon input of touch screen the following output will be seen i.e. left or right. In Transmitter Section, the instructions are delivered through touch screen from microcontroller

SOFTWARE:

  1. Embedded C
  2. Keil IDE
  3. Uc-Flash

HARDWARE:

  1. Micro Controllers
  2. Power Supply
  3. Touch screen
  4. Motor diver(L293D)
  5. Motors (GEARED MOTOR)
  6. LCD

RESULT:

According to this project we can implement a system in which a vehicle direction can be controlled wirelessly with respect to the commands given by the user through touch screen using ZIGBEE technology.

 

Leave a Reply

Be the First to Comment!

Notify of
wpDiscuz