Paper Cutting And Rewinding Machine Mechanical Project
Paper Cutting and Rewinding Machine is one of the simplest machine which cuts rolled paper in needed amount and re-winded form. The conventional paper rewinding machine has complex mechanism and bulk size. We made some modification to the conventional machine and eliminating its defects. The main peculiarity of machine is its simplicity, reduced size, weight. And also reduces floor space. This project can be directly implemented to paper cutting and rewinding machines in Paper mills. This machine can also use in textile mills, plastic and rubber sheets cutting and rewinding process in various industries by changing its cutting components.
By applying these modifications to the conventional machine reduce maintenance and servicing cost, floor area and overhead expenditures. It is well suited for small scale industries.
See also: Automatic paper cutting machine using Geneva mechanism
COMPONENTS OF PAPER CUTTING AND REWINDING MACHINE
1) BASIC FRAME
The entire unit is mounted on a rigid frame. The frame is made of mild steel C- Channels (75X40 mm) connected in rectangular form and weld at their joints.
The paper rotating element in this device is the ϕ 89 mm outer diameter rollers with ϕ 40 mm outer diameter journals, which made up of three components.
1) G. I Hollow Pipe of ϕ 89 mm outer Diameter.
2) M.S Rod of ϕ 40 mm Diameter.
3) M.S Circular Plate of ϕ 81 mm Diameter.
The rotation of motor is transferred to the one of the four rollers on which cut paper is mounting in operation. The rotating roll makes all other three rollers to rotate. The roller is supported at its two ends by Plummer block with ball bearing blocks. The main functions of roller are to favor the cutting operation by moving paper and rewind it to rolls.
4) PLUMMER BLOCK
The roller is supported at the two ends with the help of Plummer block fitted with ϕ 40 mm diameter Ball bearings.
Ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races.
6) INDUCTION MOTOR
An induction or asynchronous motor is an AC motor in which all electromagnetic energy is transferred by inductive coupling from a primary winding to a secondary winding, the two windings being separated by an air gap.
7) SINGLE V-BELT AND PULLEY SYSTEM
Vee belts (also known as V-belt or wedge rope) solved the slippage and alignment problem. It is now the basic belt for power transmission. They provide the best combination of traction, speed of movement, load of the bearings, and long service life. They are generally endless, and their general cross-section shape is trapezoidal (hence the name “V”).