EXPLOITING BLUETOOTH ON ANDROID MOBILE DEVICES FOR HOME SECURITY APPLICATION

0
2136
HOME SECURITY APPLICATION

           HOME SECURITY APPLICATION

INTRODUCTION

[nextpage title=”INTRODUCTION” ]

ABSTRACT:

Mobile devices have been integrated into our everyday life. Consequently, home automation and security are becoming increasingly prominent features on mobile devices. In this paper, we have developed a security system that interfaces with an Android mobile device. The mobile device and security system communicate via Bluetooth because a short-range-only communications system was desired. The mobile application can be loaded onto any compatible device, and once loaded, interface with the security system. Commands to lock, unlock, or check the status of the door to which the security system is installed can be sent quickly from the mobile device via a simple, easy to use GUI. The security system then acts on these commands, taking the appropriate action and sending a confirmation back to the mobile device. The security system can also tell the user if the door is open. The door also incorporates a traditional lock and key interface in case the user loses the mobile device.

PURPOSE:

The purpose of the project is to implement a wireless communication system in implementing a home security system. Safety is the most important requirement of home for people. With the development of IT technology, network and automatic control technology, an Android home security monitoring and alarming system becomes more and more practicable today. By combining wireless sensor network (WSN) and Bluetooth technology, this paper designs low-power consumption Android mobile devices for home security monitoring and alarming system that can detect the fire, lighting, theft, vibration, leaking of raw gas, obstacle detection , temperature monitoring and controlling , and all the information is send to the android mobile phone. At the same time if there is any fault occur the system will give u the alarm.

[/nextpage]

BLOCK DIAGRAM[nextpage title=”BLOCK DIAGRAM” ]

EXPLOITING BLUETOOTH ON ANDROID MOBILE DEVICES FOR HOME SECURITY APPLICATION

POWER SUPPLY

13 (2)

RECEIVER SECTION

receiver (2)

[/nextpage]

OUTPUT WINDOW[nextpage title=”OUTPUT WINDOW” ]

EXPLOITING BLUETOOTH ON ANDROID MOBILE DEVICES FOR HOME SECURITY APPLICATION 1EXPLOITING BLUETOOTH ON ANDROID MOBILE DEVICES FOR HOME SECURITY APPLICATION 2

[/nextpage]

SOFTWARE AND HARDWARE TOOLS

[nextpage title=”SOFTWARE AND HARDWARE TOOLS” ]

Software Tools:

  • KEILUV4 IDE TOOL
  • ISP PROGRAMER
  • EMBEDDED C PROGRAMMING
  • FLASHMAGIC

Hardware Tools:

  • ARM7TDMI LPC2148
  • MAX232
  • LCD DISPLAY
  • BLUETOOTH
  • POWER SUPPLY
  • GAS SENSOR
  • TEMPERATURE SENSOR
  • LDR SENSOR
  • FIRE SENSOR
  • INTRUDER DETECTION
  • OBSTACLE SENSOR
  • VIBRATION SENSOR
  • ALARM-BUZZER
  • COOLING FAN
  • DRIVER IC

[/nextpage]

 

RESULT

[nextpage title=”RESULT” ]

According to this project we can implement a Android Mobile Devices for Home Security Application. This paper designs low-power consumption Android mobile devices for home security monitoring and alarming system that can detect the fire, lighting, theft, vibration, leaking of raw gas, obstacle detection , temperature monitoring and controlling , and all the information is send to the android mobile phone. At the same time if there is any fault occur the system will give u the alarm

[/nextpage]

 

Subscribe
Notify of
0 Comments
Inline Feedbacks
View all comments