PATTERN

PATTERN in Carpentry Shop

PATTERN in Carpentry Shop A pattern is a model or the replica of the object (to be casted). It is embedded in molding sand and suitable ramming of molding sand around the pattern...
Basic of CARPENTRY

Basic of CARPENTRY

Basic of CARPENTRY Wood obtained from tree is the chief product of forest. It has been universally acceptable as raw material for manufacturing wooden products or appliances. From the pre-historic times, wood has been...

Tangent Keys and Round Keys

Tangent Keys and Round Keys Tangent Keys The tangent keys are fitted in pair at right angles as shown in Fig. 2. Each key is to withstand torsion in one direction only. These are...

Saddle keys

Saddle keys Fig. 1 saddle keys The saddle keys are of the following two types : 1. Flat saddle key, and 2. Hollow saddle key. A flat saddle key is a taper key which fits in...

Sunk Keys

Sunk Keys The sunk keys are provided half in the key way of the shaft and half in the key way of the hub or boss of the pulley. The sunk keys are...
Keys and Coupling

Keys and Coupling

Keys and Coupling Introduction : A key is a piece of mild steel inserted between the shaft and hub or boss of the pulley to connect these together in order to prevent relative motion between...
screw joint

Design of Turnbuckle

Design of Turnbuckle : Consider a turnbuckle, subjected to an axial load P, as shown in Fig. 1. Due to this load, the threaded rod will be subjected to tensile stress whose magnitude...
screw joint

Adjustable Screwed Joint for Round Rods (Turnbuckle)

screw joint A screw joint is a one-degree-of-freedom kinematic pair used in mechanisms. Screw joints provide single-axis translation by utilizing the threads of the threaded rod to provide such translation. This type...
Knuckle Joint

Design of Knuckle Joint

Design of Knuckle Joint : A knuckle joint is a mechanical joint used to connect two rods which are under a tensile load, when there is a requirement of small amount of...

IDP / UDP ?? Confused about what to start and from where ?

Final year project!!! UDP / IDP??? Confused about what to start and from where??? Then here comes the ultimate solution. UDP User Defined Project (UDP) is the project that a group or individual student decides to...